

VIKING, VIKING LICHT & VIKING SOLAR
INSTALLATIEGIDS & VIDEO
1
2
3
4
5
VIKING
Handleiding: Hoe de unit in te stellen
1. Place the unit at your selected spot
2. Place the main legs: Unscrew the main legs from the centre on the unit. Place one leg at each corner. Make sure to attach each leg with the split and clip again
3. Open the unit: Open the locker with the 4-digit code you have received in the mail with your installation guide
4. Roll down the legs: Grab the crank handle inside the unit. Use the crank handle at the main legs. Make sure that the supporting legs are lifted from the ground and that the unit is in level.
5. Attach the wires: Grab the 4 wires inside the unit. Attach each wire to the “head” of the mast. Attach the end of each line to the hook at the “body” below. Please check that all carabiners are hanging correct. The wire should be a at the top.
6. Raise the mast: Place and turn your right hand at the roller to raise the mast. Please hold your left hand at the cables to control that it does not get stock. Stop immediately if you feel any resistance. Untie the cable and then continue to raise the mast.
7. Check that all the wires are tight
8. Secure the mast: Unleash the split inside the right side of the unit. Place the split inside the hole above. NEVER put your finger into the hole. Attach the clip then the split is all way through.
9. Lock the unit
10. Connect to power
11. Call us to clarify: Please call +45 88 80 84 48 to clarify the unit

EASY SET UP
Videogids en geïllustreerde handleiding
Alle VIKINGs worden geleverd met een geïllustreerde handleiding en een videogids. Om toegang te krijgen tot de videogids moet u de QR-code op de voorkant van het apparaat vinden. Gebruik gewoon de camera-app op uw smartphone om de QR-code te scannen. Nu verschijnt de website met YouTube-video's.
